Skip to content

Guides · 28 Oct 2026

How to measure your windows before you order

A simple method to measure windows for curtains and blinds, and the mistakes to avoid.

Made-to-measure roller blind fitted on a bedroom window

Accurate measurements are the difference between curtains that look tailored and ones that look borrowed. Here is a simple method you can use to get a rough idea before we visit.

What you need

A steel measuring tape, a notebook and a helper for wide or tall windows. Cloth tapes stretch, so avoid them.

Measuring for curtains

  1. Decide where the track or rod will go. Usually 4 to 6 inches above the window, or close to the ceiling for a taller look.
  2. Measure the width of the window frame, then add 6 to 12 inches on each side so the curtains can stack back clear of the glass.
  3. Measure the drop from the track position to where you want the curtain to end: just above the floor, touching it, or at the sill.

Measuring for blinds

  1. For an inside-recess blind, measure the width inside the frame at the top, middle and bottom. Use the smallest figure.
  2. Measure the height at the left, centre and right. Use the largest figure.
  3. Check the recess depth and note any handles that stick out.

Common mistakes

  • Measuring only once. Walls in many homes are not perfectly square.
  • Forgetting skirting, switches and AC units near the window.
  • Rounding numbers. Write down exact figures.

Your own measurements are useful for an estimate, but we always measure again during the free visit before anything is made. Book a visit and we will do it for you.

See samples in your own home, free.

Book free home visit
Call now

We use cookies to understand how visitors use this site and to improve it. Read our Privacy Policy.